| Previous article | Show list | Next article |
Automatic Die-cutter Eterna Ecut 1450E
Eterna is a member of the Bobst group since 2011
ETERNA Automatic Die-Cutter - ECUT 1450 CLASS: E
Standard parts, including:
One platform;
One synthetic supporting plate (installed on the machine);
One 5mm hardened (HRC50) cutting plate (installed on the machine);
One 4mm fixed plate for 1mm cutting plate (HRC50)
Two 1mm cutting plates (HRC45)
One die chase (installed on the machine);
One set of installation accessories for upper stripping die
One set of installation accessories for lower stripping die
One lower stripping pin frame (installed on the machine)
One set of lower stripping pin and installation accessories
One set of accessories to install front edge waste stripping tool
One set of feeding wheel for cardboard (installed on the machine)
One set of feeding wheel for corrugated board
One spare gripper bar;
One set of tools (metric) with toolbox.
1. specifications
1.1 APPLICABLE MATERIALS
|
Corrugated board |
E/B/C flute, thickness up to 4.5 mm |
|
(Corrugated board with bending less than 4% is acceptable) |
|
|
Cardboard (depending on quality), up to |
2000 gsm (thickness: 2mm) |
|
Paper (depending on quality), min. |
80 gsm (thickness: 0.1mm) |
1.2 BASIC PERFORMANCE
|
Max. Sheet Size |
1450 mm × 1100 mm |
|
Min. Sheet Size |
580 mm × 500 mm |
|
Max. Mechanical Speed |
6000 cycles/hour (subject to working environment, sheet quality and operation skills, etc.) |
|
Production Speed |
5000~6000 cycles/hour (subject to working environment, sheet quality and operation skills, etc.) |
|
Max. Cutting Pressure |
400 tons |
|
Max. Pile Height at Feeder (incl. pallet) |
1750 mm |
|
Max. Pile Height at Delivery (incl. pallet) |
1550 mm |
1.3 DIMENSIONS & WEIGHT
|
Length |
10098 mm |
|
Width |
5112 mm |
|
Height |
2763 mm |
|
*including Catwalk |
|
|
Package Dimensions |
Case 1: 5760 mm (L) x 3200 mm (W )x 3157 mm (H) |
|
Case 2: 3730 mm (L) x 2896 mm (W )x 2977 mm (H) |
|
|
Case 3: Standard 20’ Container |
|
|
Net Weight |
xx T |
|
Gross Weight |
xx T |
1.4 DIE-CUTTING
|
Max. Cutting Size |
1450 mm × 1085 mm |
|
Inner Chase Size |
1540 mm ×1145 mm |
|
Adjustable Gripper Bite Range |
9~18mm (subject to working environment, sheet quality and operation skills, etc.) |
|
Cutting Rule Height |
23.8 mm |
1.5 ELECTRICAL
|
Total Power Required |
38.5 KW |
|
Variable Speed Main Motor |
18.5 KW |
|
Total Rated Current |
100A |
|
Cross Section of Extended Cord |
25mm2 |
|
Electrical Power |
400V/ 50HZ ; 460V /60 HZ transformer (as optional) to be chosen by ETERNA according to client’s local voltage |
1.6 COMPRESSED AIR PUMP
|
Max. Air Compressor Displacement |
1.05m3/min < Equipped by user> |
|
Rated Pressure of Compressed Air |
8 bar |
|
Mobile Lower Platen Adjusting Range |
±1.2 mm |
* The maximum technical values shown cannot be applied simultaneously
* Technical specifications are subject to change without notice